Facility Layout Design Using From To Chart (FTC) Method and Automated Layout Design Program (ALDEP)

Ade Astuti Widi Rahayu, Fathurohman Fathurohman, Rizki Amalia Pratiwi, Amelia Nur Fariza

Abstract

This research is conducted in SMEs engaged in the convection of children's and adult clothing. The problems in this study related to the optimization of the layout of the facility. The study aims to determine and compare the distance of moving materials before and after designing the layout of the facility and determining the layout of the facilities obtained by the From to Chart (FTC) method and the Layout Design Program Algorithm method. (ALDEP). The researchers took this problem to study because the production process flow from Adelian convection is still not optimal due to the large number of alternating material flows that cause swelling in material handling costs, resulting in less effective and efficient work. The results of the study using the FTC method obtained that the distance for the movement of goods for the initial layout from the process starting to storage is 624 m. The distance of the movement of goods for the proposal layout from the start of the process to storage is 437 m. Therefore, there is a reduction in the distance between facilities from the start of the process to the storage of goods by 187 m. The results of the study using the ALDEP method could cost material handling costs of 30.01% from the comparison between OMH/month in the initial layout, which was Rp.26. 947,778 with OMH/month from the proposal layout, which was Rp. 18,861,310.8, so there was a decrease in OMH/month by Rp. 8,086,467.2.

Keywords

Aldep, facility layout, from to chart, material handling cost

Full Text:

PDF

References

Barbara, A., & Cahyana, A. S. (2021). Production Facility Layout Design Using Activity Relationship Chart (ARC) And From To Chart (FTC) Methods. Procedia of Engineering and Life Science, 1(2).

Burggräf, P., Adlon, T., Hahn, V., & Schulz-Isenbeck, T. (2021). Fields of action towards automated facility layout design and optimization in factory planning – A systematic literature review. CIRP Journal of Manufacturing Science and Technology, 35(2001), 864–871.

Casban, C., & Nelfiyanti, N. (2020). Production Facility Layout Analysis Using Ftc And Arc Methods To Reduce Material Handling Costs. PASTI Journal, 13(3), 262.

Husen, T. A., Suryadhini, P. P., & Astuti, M. D. (2020). Facility Layout Design to Minimize Material Handling Distances in UKM XYZ by Using the Aldep Method. IDEC National Seminar and Conference 2020.

Islaha, A. F., & Cahyana, A. S. (2018). Efforts to Increase Productivity by Minimizing Waste Using From To Chart (FTC). PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 1(2), 107.

Karandikar, V., Sane, S., Rathod, D., & Jaiswal, A. (2017). The layout design uses Systematic Layout Planning for the Electronics Division at the Manufacturing Facility. 7(5), 1878–1884.

Nabilah, P. M., Suryadhini, P. P., & ... (2019). Layout Design of Factory Facilities at Pt. Nagoya To Minimize Waiting Time Using the Aldep Algorithm Method. EProceedings …, 6(2), 7189–7197.

Pamularsih, T., Mustofa, F. H., & Susanty, S. (2014). Using the Automated Layout Design Program (Aldep) method at Edem Ceramic. Design Integra, 02(04), 12.

Sofyan, D., Sofyan, D. K., & Syarifuddin, S. (2018). Facility Layout Redesign Using 5S-Based Conventional Methods (Seiri, Seiton, Seiso, Seiketsu And Shitsuke). Teknovasi Journal: Journal of Engineering and Innovation, 2(2), 27–41.

Suhardini, D., & Rahmawati, S. D. (2019). Design and improvement of the layout of a production floor using an automated layout design program (ALDEP) and CRAFT algorithm at CV. Aji Jaya Mandiri. IOP Conference Series: Materials Science and Engineering, 528(1).

DOI: https://doi.org/10.33536/jiem.v9i2.1883

Refbacks

  • There are currently no refbacks.


Bookmark and Share