QUEUING MODEL DESIGN TO OPTIMIZE FOR PRE FLIGHT SERVICES DURING THE COVID-19 PANDEMIC. (Case Study At Sultan Hasanuddin International Airport Makassar)

Faisal Halim, Sapta Asmal, Kifayah Amar

Abstract

This study aims to determine (1) the optimal timing for flight service users before making a flight (pre flight) at Sultan Hasanuddin International Airport Makassar. (2) The optimal standard time during the Pre Flight process during the Covid-19 pandemic at Makassar Sultan Hasanuddin International Airport, and (3) Efforts made by airport managers in minimizing pre flight processing time.

This study uses the Flow Process Chart method which is a schematic/diagram depiction that shows all the steps in a program and shows how the steps interact with each other.

Based on the results of the analysis, it is concluded that: the optimal time for Pre Flight Services activities at Sultan Hasanuddin International Airport Makassar is not in accordance with the standards that refer to the Decree of the Director General of Civil Aviation where the standard time is still high; the optimal time required for the Pre Flight Services process is 20 minutes 40 seconds for normal time and the standard time is 23 minutes 37 seconds; As for the efforts made to minimize pre-flight processing time, including improving the quality of human resources on duty, increasing airport capacity, correcting infrastructure, regular maintenance of the equipment used and maximizing service at the check-in counter, especially during peak loads

Keywords

work standard; pre flight services; flow process chart; normal time; standard time

Full Text:

PDF

References

Afiah, Irma Nur. 2020. “ERGONOMIC EVALUATION OF STUDY DESKS AND CHAIRS USING ANTHROPOMETRY AND BIOMECHANICAL APPROACH AT AN-NURIYAH ISLAMIC BOARDING SCHOOL BONTOCINI JENEPONTO REGENCY.” Journal of Industrial Engineering Management 5(2): 31–42. https://jurnal.teknologiindustriumi.ac.id/index.php/JIEM/article/view/727.

Ahmad, Lamatinulu, Irma Nur Afiah, Arfandi Ahmad, and Muhammad Irfandi. 2022. “PACKAGING DESIGN OF FRIED BANANA PRODUCTS FOR FOOD PACKAGING ASSURANCE FOR CONSUMERS USING FOOD DELIVERY SERVICES IN MAKASSAR CITY.” Journal of Industrial Engineering Management 7(2): 169–74. https://jurnal.teknologiindustriumi.ac.id/index.php/JIEM/article/view/1325.

Anggoro, Dani, and Ahmad Hidayat. 2020. “Rancang Bangun Sistem Informasi Perpustakaan Sekolah Berbasis Web Guna Meningkatkan Efektivitas Layanan Pustakawan.” Edumatic : Jurnal Pendidikan Informatika 4(1): 151–60. http://e-journal.hamzanwadi.ac.id/index.php/edumatic/article/view/2130.

Dahlan, Muhammad, Arfandi Ahmad, A Pawennari, and Widya Alimuddin. 2022. “Pengendalian Persediaan Bahan Bakar Solar Menggunakan Model Probabilistik Pada SPDN Baji Pamai Maros.” Conference SENATIK STT Adisutjipto Yogyakarta 7. https://senatik.itda.ac.id/index.php/senatik/article/view/443.

Destriana, Rachmat. 2018. “EFEKTIVITAS KINERJA IT SUPPORT MENGGUNAKAN FUNGSI SERVICE DESK SEBAGAI SINGLE POINT OF CONTACT (SPOC): STUDI KASUS PT XYZ.” JIKA (Jurnal Informatika) 2(1). http://jurnal.umt.ac.id/index.php/jika/article/view/1539.

Efendi, Zulman. 2007. “Penerapan Quality Function Deployment (QFD) Untuk Peningkatan Kinerja Industri Kecil Bakso Sapi Berdasarkan Kepuasan PelangganPenerapan Quality Function Deployment (QFD) Untuk Peningkatan Kinerja Industri Kecil Bakso Sapi Berdasarkan Kepuasan Pelanggan.” Jurnal Sain Peternakan Indonesia 2(2): 85–90. https://ejournal.unib.ac.id/index.php/jspi/article/view/106.

L’Hermitte, Cécile, Peter Tatham, Ben Brooks, and Marcus Bowles. 2016. “Supply Chain Agility in Humanitarian Protracted Operations.” Journal of Humanitarian Logistics and Supply Chain Management 6(2): 173–201. https://www.emerald.com/insight/content/doi/10.1108/JHLSCM-09-2015-0037/full/html.

Mail, Abdul et al. 2021. “ANALYSIS OF THE EFFECTIVENESS OF CLEAN WATER DISTRIBUTION MACHINE USING OVERALL EQUIPMENT EFFECTIVENESS (OEE) METHOD.” Journal of Industrial Engineering Management 6(1): 49–56. https://jurnal.teknologiindustriumi.ac.id/index.php/JIEM/article/view/884.

Small, Edgar P., Lu’ay Ayyash, and Khaled Al Hamouri. 2017. “Benchmarking Performance of TQM Principals in Electrical Subcontracting in Dubai: A Case Study.” Procedia Engineering 196: 622–29. https://linkinghub.elsevier.com/retrieve/pii/S1877705817331776.

Refbacks

  • There are currently no refbacks.