PRODUCTIVITY MEASUREMENT ANALYSIS USING OMAX AND AHP METHODS ON BATIK SME
Abstract
Batik is a cultural heritage originating from Indonesia which has been designated by UNESCO. Since then, the business of making batik has grown rapidly in Indonesia, with each region having its characteristics. In making batik, there are two kinds of manufacturing processes, namely the manufacturing production process and the traditional manufacturing process. Batik production is a unique process because it contains works of art with a traditional manufacturing process and contains elements of local policies. The difference in the manufacturing production process using modern technology, the resulting batik products also have the same results and can produce a lot of batik cloth in a short processing time. As for the process of making traditional batik, it must be produced one by one using traditional equipment, the batik pattern of each cloth is different, for the results cannot be identified this makes it special, and each stage of the process takes quite a long time. Productivity is important for batik production. Especially done by craftsmen in areas that are relatively new to developing traditional batik since the era of world cultural heritage has only been accepted by Indonesia. This study measures the productivity of BM batik SME in Malang. Based on the calculation and analysis of productivity using the Objective Matrix (OMAX) method for BM Batik SME, it can be concluded that the productivity of SME is low, with the lowest being the productivity of batik working time (value 1), the productivity of batik products having (value 1). 3) and labor productivity (score 5). With fishbone diagram analysis, it can be found the cause of the low productivity of these traditional batik SME. From here, several alternative solutions can be obtained, as recommendations for efforts to increase the productivity of SME based on traditional production without eliminating the heritage standards of batik works.
Keywords
Full Text:
PDFReferences
Annisa Mulia Rani, Muhammad Kosasih, R. M. S. (2018) ‘Upaya Peningkatan Produktivitas Cabin Td Pretreatment Electro Diposition ( Pted ) Berbasis Model Objective Matrix ( Omax ) Pt . Xyz’, Jurnal Integrasi Sistem Industri, 5(1), pp. 12–17.
Bahrudin, M. and Wahyuni, H. C. (2018) ‘Pengukuran Produktivitas Kerja Karyawan pada Bagian Produksi dengan Menggunakan Metode Objective Matrix (OMAX) Dan Root Cause Analyze (RCA)’, PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 1(2), p. 116. doi: 10.21070/prozima.v1i2.1299.
CF Putri, I Nugroho, D. P. (2018) ‘Performance Measurement the AN Batik SMEs in Batu Using Smart System Method, International Conference on Science Technology and Engineering For Sustainable Development’, ICoSTES.
Fatma Putri, C. and Agus Sahbana, M. (2021) ‘The Influence of Production Factors on Productivity in Batik SME’s in Malang Raya’, Journal of Physics: Conference Series, 1908(1). doi: 10.1088/1742-6596/1908/1/012027.
GAMINDRA JAUHARI, MELDIA FITRI, A. S. D. N. (2019) ‘PENERAPAN METODE OBJECTIVE MATRIX (OMAX) UNTUK MENGANALISIS PRODUKTIVITAS DI PT. NUSANTARA BETA FARMA PADANG GAMINDRA’, Ensiklopedia of Journal PENERAPAN, 1(2), pp. 54–59. doi: 10.1017/CBO9781107415324.004.
Hardiantara, Y., Kusmindari, C. D. and Zahri, A. (2019) ‘ANALISIS PRODUKTIVITAS PEMBANGKIT LISTRIK TENAGA GAS DENGAN METODE OBJECTIVE MATRIX (OMAX) (Studi Kasus : PT SA ARY INDORAYA)’, Jurnal Tekno, 16(1), pp. 17–37. doi: 10.33557/jtekno.v16i1.357.
Ifa Hanif, Iffan Maflahah, M. F. (2019) ‘ANALISIS PRODUKTIVITAS DENGAN METODE APC ( AMERICAN PRODUCTIVITY CENTER ) ROTI PIA PADA IRT PIA LATIEF KEDIRI’, Agrointek Agroindustrial Technology, 13(2), pp. 143–154. doi: 10.21107/agrointek.v13i2.5291.g3749.
Mail, A. et al. (2018) ‘Analisis Produktivitas Dengan Metode Objektive Matrix (Omax) Pada Cv. Bintang Jaya’, Journal of Industrial Engineering Management, 3(2), p. 48. doi: 10.33536/jiem.v3i2.234.
Mollah, M. K. et al. (2009) ‘Analisis Peningkatan Produktivitas Perusahaan Menggunakan Objective Matrix dan Pendekatan Lean Manufacturing’, Seminar Nasional Sains dan Teknologi Terapan, pp. 291–296.
Ollifia Ayu Ningtyas, L. (2019) ‘Analisis Produktivitas Menggunakan Metode Marvin E . Mundel dan Productivity Evaluation Tree ( PET )’, e-journal Itats, 6(1), pp. 303–308.
Putri, C. F. et al. (2017) ‘Pengaruh Karakteristik Individu Dan Kewirausahaan Terhadap Kinerja Ikm Batik Di Malang Raya’, in Seminar Nasional Gelar Produk. Malang: Universitas Muhammadiyah Malang, pp. 3–8.
Putri, Chauliah Fatma, Nugroho, I. and Purnomo, D. (2019) ‘Performance Measurement of SMEs of Malang Batik as a Result of Local Wisdom with Balanced Scorecard’, IOP Conference Series: Materials Science and Engineering, 505(1). doi: 10.1088/1757-899X/505/1/012022.
Putri, C. F., Nugroho, I. and Purnomo, D. (2019) ‘Performance Measurement of SMEs of Malang Batik as a Result of Local Wisdom with Balanced Scorecard’, IOP Conference Series: Materials Science and Engineering, 505(1). doi: 10.1088/1757-899X/505/1/012022.
Ramadhani, S. N., Prihandoko, A. C. and Adiwijaya, N. O. (2018) ‘Sistem Informasi Pengukuran Produktivitas Hotel di Kabupaten Jember Menggunakan Metode OMAX (Objective Matrix) dan AHP (Analytical Hierarchy Process) (Studi Kasus Hotel Istana)’, Berkala Sainstek, 6(1), p. 10. doi: 10.19184/bst.v6i1.7555.
Ramayanti, G., Sastraguntara, G. and Supriyadi, S. (2020) ‘Analisis Produktivitas dengan Metode Objective Matrix (OMAX) di Lantai Produksi Perusahaan Botol Minuman’, Jurnal INTECH Teknik Industri Universitas Serang Raya, 6(1), pp. 31–38. doi: 10.30656/intech.v6i1.2275.
Robino Indan, R. A. (no date) ‘Analisis Pengukuran Produktivitas Produksi Teh Hitam Dengan Metode Objective Matrix’, Civil Engineering Colaboration, 1(2), pp. 129–134.
Siregar, A. P. et al. (2020) ‘Upaya Pengembangan Industri Batik di Indonesia’, Dinamika Kerajinan dan Batik: Majalah Ilmiah, 37(1). doi: 10.22322/dkb.v37i1.5945.
Suparto, dan M. H. (2019) ‘ANALISIS PENGUKURAN PRODUKTIVITAS DENGAN METODE OBJECTIVE MATRIX (OMAX) PADA DEPARTEMEN SERVICE PT. ASTRA INTERNATIONAL TBK AUTO 2000 CABANG KENJERAN’, in Prosiding SENDI_U, pp. 673–677.
Wibisono, D. (2019) ‘Analisis Produktivitas Dengan Menggunakan Pendekatan Metode Objective Matrix (OMAX) Studi Kasus di PT. XYZ’, Jurnal Optimasi Teknik Industri (JOTI), 1(1), p. 1. doi: 10.30998/joti.v1i1.3423.
Refbacks
- There are currently no refbacks.